Vinten FH-145 with FE-165 Pedestal System

Lightly Used

Like New Condition!

8 Available!

In Stock!

Vinten FH-145 Specs

Payload:      145 lb / 66 kg

Pan Range: 720° (no end stops)

Tilt Range:   100° (± 50°)

Speed:        0.01 - 60°/sec

Rated Load Inertia:     7.5 kgm2

Maximum Acceleration:             60°/sec2

Resolution Position Resolution: 22 bits

Repeatability:     < 0.03°, 2 minutes of arc

Encoder:     Pan: > 2 mil counts/rev

                   Tilt: > 2 mil counts/rev

Wattage:     175 W

Voltage:      100 to 240 VAC, 50 to 60 Hz auto-ranging

Power:           Neutrik "True 1" power input (fused)

                      Unfused power output using Neutrik "True 1" outlet

GPIO Lens Indication Power:       

                Lens: D-type for digital zoom and focus

                Indication: Power, communications, and VR data

Power On/Off Switch:  On/Off switch (light brightness can be adjusted)

Control Interfaces:     

                Fusion VRC, FCS16, and LCS

                Own interface to set up and diagnose faults

NLD:          All Fujinon and Canon full servo lenses

Tilt Lock:    Software indication of lock on

Weight:      51.6 lb / 23.4 kg

Cradle:     6.4 lb / 2.9 kg

Easy to set up, operate, and service, the FH-145 S2 Pan and Tilt Head from Vinten is designed to support typical camera and lens packages up to 145 lb. It features both manual and robotic modes that allow you to switch between free-form or pre-programmed show format. The quality fluid drag system delivers manual operation that can be used for broadcasting.

With smooth camera motion control, this head makes use of high-resolution absolute encoders and delivers an accuracy of ±0.03°. The user-friendly aesthetics and ergonomics with tilt lock add to its security, while the reconfigurable mounting cradle suits a wide range of camera, lens, and accessory payloads.

FE-165      Class-leading on-air height control for maximum flexibility

The Vinten FE-165 Elevation Unit offers class-leading on-air height control for maximum flexibility in large fully automated, and small production studios.

Height Range:     741-1631 mm (29.2-64.2 in)

Max. speed:        150 mm/s (5.9 in/s)

Max. payload:     75 kg (165 lb)

Width:         690 mm (27.2 in)

Ground clearance:       25 mm (1 in)

Power inlet:       

                 100-240 V AC

                 Autoranging

                50/60Hz

Power outlets:   

                Dual 100-240 VAC

                AC Autoranging

                50/60Hz