Panasonic AJ-HPX3700 VariCam Camcorder P2

Owner Operator!

Not A Rental Camera!

Hours

Op. 760

Power On 2422

Comes with

View Finder

Tripod Plate

Microphone

Product Highlights

•  2/3" 2.2MP 3CCD

•  1920 x 1080 Effective Picture Elements

•  Dual-Link HD SDI Output for RGB 4:4:4

•  AVC-Intra 100/50 and DVCPRO HD Formats

•  10-bit 4:2:2 Full Raster Sampling

•  F10 Sensitivity at 2000 Lux

•  Film-Like Recording Gamma Modes

•  1080/60i, 50i

•  48 kHz/16-Bit, 4-Channel Digital Audio

The Panasonic AJ-HPX3700 VariCam Camcorder is a high-end professional camera meant to replicate the warm and natural look and texture of film. Featuring a variable frame rate from 1 to 30 fps, in 1080p, this camera enables you to easily under or overcrank your shooting for creative fast and slow motion effects. This camera's native effective resolution is 1920 x 1080 and features 3x 2/3" 2.2MP CCD sensors for high quality imagery. This camera also features 2 HD SDI output terminals for creating a dual-link output for RGB4:4:4 video with a 10-bit Log (P-10Log) gamma curve. An F10 sensitivity supports low-light photography at 2000 Lux and a minimum illumination of 0.042 Lux. Recording is possible in AVC-Intra 100, AVC-Intra 50, and DVCPRO HD; 4:2:2 full raster sampling is supported in the AC-Intra 100 format.

Selectable gamma modes further allow for realistic, film-like qualities by extending the dynamic range, lowering the overall contrast, and reducing the highlights within the scene. 14-bit digital processing with 12-axis color correction permit further fine tuning of the scene by manipulating certain colors and textures; such as skin tones.

High Resolution 2.2MP 2/3" 3CCD

3 large sensors combined with a digital signal processing circuit allows for high definition 1920 x 1080
imagery. Both progressive and interlaced formats are supported, with 1080/23.98p, 24p, 25p, 30p as native formats as well as 1080/60i, 50i. A high F10 sensitivity at 2000 lx is also available, allowing low-light filming as low as 0.042 Lux illumination.

RGB 4:4:4/10-Bit Log Output

The 2 HD SDI output terminals work in conjunction to create dual-link output and can output HD imagery with RGB 4:4:4 quality and the 10-bit Log (P-10Log) gamma curve. This is ideal for creating high-end film productions when using an uncompressed recorder.

Variable Frame Rate

With the ability to photograph at 1 to 30 frames per second, this camera provides a variety of under andovercranking possibilities to produce slow and fast motion effects. This range of frame rates is available in the native formats.

14-Bit Digital Processing and 12-Axis Color Correction

The 14-bit A/D conversion system and digital signal processing provide a wealth of technologies for color correction and adjustment. A 12-axis color correction matrix enables you to finely tune specific color regions, such as skin tones and highlight regions.

7 Gamma Modes for Film-Like Quality

The high-performance DSP provides 7 different gamma modes to help mimic the look of different technologies:

HD: For HDTV

SD: For SDTV, results in higher gain in dark areas

FILMLIKE 1: Smoother and clearer gradations in highlight areas than HD gamma

FILMLIKE 2: Smoother, more film-like characteristics than FILMLIKE 1

FILMLIKE 3: Even smoother, morefilm-like characteristics than FILMLIKE 2

FILM-REC: Most closely resembles film-style capture, provides the lowest contrast and widest dynamic range

VIDEO-REC: Cinema quality productionthat is suitable for video displays

Dynamic Range Stretch (DRS)

This functions helps to suppress blocked up shadows and blown out highlights that are common when photographing in high contrast areas or when moving from outdoors to indoors. The DRS function automatically utilizes an estimated gamma curve and knee slope to match the contrast of each pixel, resulting in a wider dynamic range with excellent gradation from the highlights to shadows.

Chromatic Aberration Compensation (CAC)

When used in conjunction with a compatible lens, this technology employs a sophisticated algorithm that compensates for blur and color shifts that are mainly caused by lens chromatic aberration. The resulting images from a CAC-enabled zoom lens more closely resemble those captured with a prime lens; free of image degradation.

Scan Reverse Function for Using Film Lenses

The camera is capable of using an ultra prime lens or anamorphic lens adapter for creating a 2.35:1 aspect ratio widescreen image without cropping. The scan reverse function cancels the image inversion that occurs when using an Angenieux HD lens adapter.

1080p Native Mode

When recording in the native mode, the camera only records in the frame rate selected; this allows for direct
playback at the chosen speed rather than having to use a frame rate converter. P2 recording time is also extended when using the native mode.

1080/24p Advance Mode

When in 24p Advance mode, a 2:3:3:2 pulldown is applied to a 1080/24p recording mode in order to produce over 60i recording. This allows for compatibility with HD handheld cameras that use an HD codec.

Electronic Shutter with Half Mode and Angle Setting

The built-in electronic shutter provides 7 different speeds up to maximum of 1/2000 second, a half mode, and an angle setting, for similar results compared to working with a film camera. When combined with the variable frame rate function, a wide variety of shooting techniques can be utilized. There is also a synchro scan function for use when photographing computer monitors.

AVC-Intra Codec

The AVC-Intra codec is a high quality and equally efficient codec for HD video production. Two modes are supported: AVC-Intra 100 for full HD (1920 x 1080) images and AVC-Intra 50 for lower bit-rate, more economical recording. Both modes are compliant with the MPEG-4 AVC/H.264 standard for compression and image quality. These modes record with intra-frame compression for greater versatility when editing.

AVC-Intra 100: This mode records with the same 10-bit rate as DVCPRO HD and enables high quality 1920 x 1080 recordings.

AVC-Intra 50: This mode produces results similar to DVCPRO HD, but with bit rates that are more akin to standard definition recording. When recording in this mode you are afforded twice the amount of recording time per P2 card and less storage is required for editing.

DVCPRO HD Recording

Conventional DVCPRO HD recording is also supported for greater flexibility amongst numerous applications and system environments. It also enables a fluid transition from existing VTR VariCam
systems and older platforms.

48 kHz/16-Bit, 4-Channel Digital Audio

48 kHz/16-bit digital audio recording is supported on all 4 audio channels; and you can easily select the audiosource for each channel independently. A 5-pin XLR jack with 2-channel compatibility is used for the front mic input.

5x P2 Card Slots

When all 5 P2 card slots are utilized, up to 800 uninterrupted minutes of 1080/24p content can be recorded.
Other benefits of P2 card recording include the opportunity to switch cards while recording; select specific cards to record to; loop recording to specific, fixed areas of the card; pre-record up to 8 seconds when in standby mode; record intermittently based on set interval times; one-shot recording for use when filming animations; and record review for a quick playback check of the final seconds of the recently finished clip.

Clip Thumbnail Function

For each clip you film, a thumbnail is automatically generated for easy navigation through different clips. You can view thumbnail images on the built-in 3.5" / 8.9cm LCD or on a separate display. Clips can be controlled in playback, deleted instantly, and you can also select a number of clips for seamless playback together.

Text Memo and Bookmarking for Simple Editing

While recording or previewing a clip, you can press the Text Memo button and create a text label or bookmark for noting certain parts of the footage. Text can be entered into each memo with the camera or with a PC using P2 Viewer. You can also create a new clip with data copied between text memo labels, using the camera itself. There are also shot marks for simple OK and NG markings, when more text is unnecessary.

SD/SDHC Memory Card Slot

There is a built-in SD/SDHC memory card slot for copying metadata files containing important information such as the camera operator, locations, text memos, and backups of the photography metadata. The memory card slot is also used to transfer firmware updates and to upload different scene files.

Scene Files, Lens Files, and User Buttons

Up to 16 different scene files can be stored within the camera, and up to 8 more on a SD/SDHC memory card, that record specific camera settings for quickly returning to a previous setting. 64 lens files can also be stored in-camera, and 64 more on a memory card, for programming settings on a variety of interchangeable lenses. There are also 5 programmable user buttons that allow you to choose from a variety of settings
to have accessible by pressing a button.

Focus and Shooting Assist Functions

The focus assist function provides an objective comparison of the incoming frequency distribution signal and portrays it in graph for in the viewfinder and LCD monitor. There is also a variable color temperature adjustment dial and switchable color bar for controlling the look of the scene around you. 2-level zebra and a variety of marker settings are also available.

2-Layer Optical Filter

The built-in 2-layer optical filter contains a neutral density layer (clear, 1/4 ND, 1/16 ND, 1/64 ND) and a CC
layer (3200K, 4300K, 5600K, and 1/2 ND). By having the 1/2 ND filter on the CC layer, finer aperture adjustment is enabled.

Efficient Design for Reliability and Mobility

The innovative grip handle design incorporates 5 threaded holes for mounting a variety of accessories directly to the camera body. The interface of the camera features an intuitive switch and dial layout for maximum efficiency as well as a 3-point locking viewfinder with color viewfinder compatibility. The audio adjustment features can be manually locked, switched on/off, and allocated to the desired channels.

3 HD SDI Outputs with SD Down Conversion

2 dedicated HD SDI output terminals are integrated that also comply with 1080/24PsF standards and include embedded audio. Additionally, an HD SDI video signal can be output from the MON OUT terminal. Character and marker displays can be set separately for both HD SDI and MON OUT terminals. The output signal from the MON OUT terminal can also be switched to VBS, which will output a down-converted SD video signal (analog composite).

Host and Device Modes Compatible with USB 2.0 Interface

When in device mode, the camera's P2 card slot can be used to connect to a PC as an external device for nonlinear editing and transmission over networks. When in host mode, files from the P2 card can be transferred to a hard disk without the use of a PC.

Multipurpose DC OUT Terminal

The DC OUT terminal can be used for remote start/stop recording control when connected to an external switch, or as a tally lamp when connected to an LED. This multipurpose functionality is ideal for use when the camera is mounted to a crane or out of immediate reach.

Multi-Function RCU Output

An RCU terminal allows for the use of an optional remote control system, such as the AJ-RC10G, for image and recording control while viewing the camera's image on an auxiliary monitor.

Additional Features

When used in conjunction with the optional AJ GPS910G GPS unit, real-time location data can be recorded
conforming to UMID standards.

• Built-in SMPTE time code generator and reader with TC in/out terminal.
• Genlock input terminal doubles as an HD-Y and VBS return video.
• Compatible with UniSlot wireless receivers.