4 Sony DXC D50WS Triax Camera Set Ups

(Price is per chain)
[ There are 4 complete chains ]
Each chain consists of

1-Sony DXC-50WSL (Camera head)

1-Sony CA-TX50 (camera backs)

1-Sony DXF -801 VF (ENG View finder)

1-Sony DXF-51 VF (studio View finder)

1-Sony RCP-D50 (remote control unit)

1-Sony CCU TX50 (camera control unit)

Sony DXC D50WS Camera Head  This camera features the high-performance Power HAD™ EX CCD sensor and precise 12-bit A/D conversion built into a highly sophisticated LSI. The result is superior picture quality, high sensitivity, plus low noise and smear characteristics over previous models. A variety of automatic functions have also been included, allowing easy and convenient operation in any shooting scenario

Sony TA backs –CA-TX50  The Sony CA-TX50 is a triax camera adapter back for the DXC-D50 digital camera heads. The Triax system supplies Analog component video from camera to control position and
camera control the other way all with the same cables. Camera control protocol and component video output run over very long distances. In addition the triax system supplies return video to the camera for monitoring the program video feed plus teleprompter information, tally lights and the possibility of SDI
output with and optional CCU board.

Sony DXF-801 VF  1.5" black and white viewfinder capable of switching between 16:9 and
4:3 aspect ratios automatically. The die cast aluminum body translates into a lightweight, robust finder enhanced for use in dimly lit environments. This model works with the DSR-400 and DSR-450 camcorder models.

Sony DXF-51 Studio VF 1. 5" monochrome studio viewfinder offers 650 lines of resolution. When
connected to a 16:9 aspect camera, the viewfinder will automatically switch the aspect ratio from 4:3 to 16:9. The 4:3 CRT of the DXF-51 automatically switches between 4:3 and 16:9 aspect ratios, depending on the active aspect ratio of the connected camera. Includes both 20-pin and 8-pin camera connectors. Various
controls such as Shutter/Gain LED indication and 4:3/16:9 switching are possible through 20-pin serial data transmission. The native 20-pin connector is designed for use with cameras such as the DXC-D35. Pan and Tilt control is easily adjusted. A Tilt range of +/- 40° and Pan range of +/-90°. At any tilt
angle, the center of gravity does not change, keeping the camera balance stable. The DXF-51 is small and lightweight. Its main chassis is constructed of rugged die-cast aluminum, making the viewfinder body very durable. This unit also has front controls.

Sony RCP-D50  The RCP-D50 is the Joystick style remote panel for connecting to the CCU-D50 camera control unit. Maximum cable length is 164 feet or 50 meters.  

Sony CCU-TX50  This unit transfers wide-band component video signals. The camera control panel mounted
on the unit's front enables video camera operations to be controlled from the unit, while addition of an optional remote control allows camera control from both remote and camera control unit. Input and output connectors include those for outputting such signals as a composite video signal (VBS), component video signals (switchable to RGB), SDI signals, and video signals for video and waveform monitors, for inputting a reference signal for external synchronization. Two CCU-TX50s can be installed side by side in an optional rack mount bracket.